58 cm 1986 Schwinn Peloton frame built up with all modern parts
Frame:
1986 Schwinn Peloton Columbus SL/SP
Fork/Headset:
Stock / Tange
Crankset/Bottom Bracket:
105 5700
Pedals:
Shimano SPD
Drivetrain/Cog/Chainring/Chain:
105 5700
Derailleurs/Shifters:
105 5700 / Dura-ace Downtube
Saddle/Seatpost:
Selle Qbik / Nitto S65
Brakes:
105 5700
Front Wheel/Hub/Tire:
H + Son Archetype / 105 5800 / Gatorskin
Rear Wheel/Hub/Tire:
H + Son Archetype / 105 5800 / Gatorskin
Bike History
Click a link below to see past stages of this bike.
Current Stage Info:
Converted back to DT shifters and threaded fork and quill stem for a more retro feel.
Added by eerdverk. Last updated almost 6 years ago.
8 Comments
Awesome looking build. I bought one new in 86' and the bike is still solid but needs to be modernized. What do you estimate your cost for this rebuild? Any issues with the fitment of the new parts? Any info you can provide would be great. Thx
Posted over 8 years ago
I probably spent close to 1k on this build doing all the work myself. Depending on how you want to build it up, it could be closer to 500.
The only fitment issue you should have is the rear frame spacing is 126mm and newer hubs are 130. But this is a steel frame so you can use Sheldon Brown's cold setting method (basically just slightly bending the stays).
Posted over 8 years ago
I like what you've done with this! Looks like a great ride, and comfortable too!
Posted over 9 years ago
This is one of the best neo-retro builds I have seen! Great job! I'd ride the hell out of this bike!
Posted over 9 years ago
Photos
Nathap470 says:
This is super hot!
Posted over 7 years ago