Very happy with this frame. Feels fast and handles well. Even more pleased with it after the paint job. Note: Headset/crown-race gaps have been corrected, pictures do not reflect current state.
Frame:
Visp TRX 790
Fork/Headset:
3T Funda Pro Carbon Fork / VP Headset
Crankset/Bottom Bracket:
SRAM S300 1.1 / GXP External Bearing
Pedals:
Crank Brothers Candy 2
Drivetrain/Cog/Chainring/Chain:
13T/ 48T / KMC
Saddle/Seatpost:
Carbon Aero-Post
Front Wheel/Hub/Tire:
Novatec Force, 30mm / Kenda 700 x 23
Rear Wheel/Hub/Tire:
Novatec Force, 30mm / Kenda 700 x 23
More Info:
Big thanks to Longkachia here on Pedal Room for the great decals. OPS!
http://www.pedalroom.com/members/longkachia
Bike History
Click a link below to see past stages of this bike.
Current Stage Info:
Finally went brakeless and installed my carbon fork, pedals and wheelset.
Added by Kevin_R. Last updated almost 12 years ago.
As of almost 12 years ago, Kevin_R has indicated that they no longer own this bike.
78 Comments
Okay, I have to say that the paintjob, the 'OPS!' decals, and combination of the 3T's fork, makes it way cooler.
Nice!
Posted almost 12 years ago
I worked hard to get it just how I liked it, made riding it all the better. Thanks a lot :D
Posted almost 12 years ago
ha, yeah, I couldn't remove the crown race off the old fork so I had to use a taller crownrace and my headset cap needs a microspacer but instead I put a 3mm spacer, ordering a new headset, should fix all of this thanks,lol
Posted almost 12 years ago
hei man, looks like your headset didn't fit with well, is it okay?
Posted almost 12 years ago
why dont you get the enve fork instead? it'll lookhella sick on your frame, I think its a lil cheaper than the funda
Posted almost 12 years ago
The ENVEs look sweet, but they just didn't have the wide aero profile I was going for. Still a nice looking fork.
Posted almost 12 years ago
How the 3t fork
i was planning to get one or an unknown full carbon track
Posted almost 12 years ago
I haven't heard much on the Unknown fork but the 3T is a great fork. It feels very stiff and is incredibly light. Very noticeable coming from an aluminum fork
Posted almost 12 years ago
Really clean bro.
Where did you buy your frame?
Posted almost 12 years ago
I got it off ebay although they don't seem to have it anymore, try alibaba, and thanks man
Posted almost 12 years ago
Good job with new paint job , just need new saddle and its all done
Posted almost 12 years ago
Thanks, def worth it, and I may look into it once I get my funds up
Posted almost 12 years ago
Dude you need a new seat!
Posted almost 12 years ago
So true, never payed much attention to it but probably the next upgrade
Posted almost 12 years ago
love the new looks! how's the sram s300 treating you?
Posted almost 12 years ago
I love them. Super smooth,solid and a great upgrade for someone coming from internal bearings. And thanks bro
Posted almost 12 years ago
Great VISP!
Fresh paint and cool decal also.
Added to my fav ..
Posted about 12 years ago
Oh man.
Your good thing have so bloddy distaice of saddle to handle.
Very Very nice distance.
Looks like a your length is so long.
aint ya?
Anyway!
Your bike 's gear ware single speed.
How to go hill? push cart off?
Or flat town use?
Posted about 12 years ago
Hey man thanks, I like that steep drop from the saddle to the drops. There's a pretty good mix of hills and flat land here where I live.
Posted about 12 years ago
The protection cap cracked (plastic) and so I placed a spacer beneath it
Posted about 12 years ago
Like the Gossamer drops, how much it cost?
Posted about 12 years ago
Thanks, they're really comfortable and fairly light for around 20 dollars, you just have to look around.
Posted about 12 years ago
nice build :)
how tall are you man? i'm thinking about getting a 56cm visp but not quite sure how it'll fit yet
Posted about 12 years ago
Thanks! I'm 6'1, the 56 is a size smaller than someone my height would get,which would be a 57 or 58,I think a slightly smaller is far more comfortable than one too large
Posted about 12 years ago
should get clipless, it totally feels a lot better
Posted about 12 years ago
Yeah? That's an upgrade I've been considering but haven't been sure if they were worth it. Wheels are next but ill be sure to look into it, thanks!
Posted about 12 years ago
Yeah its a good upgrade, if you're on the budget, I would get the shimano pdr540
Posted about 12 years ago
Usually I cant stand the sight of a Visp bike, but this is refreshing.. It's good not seeing aother tarck visp.
Posted over 12 years ago
Ha, I know exactly what you mean, i feel the same way looking through some Visp builds, thanks!
Posted over 12 years ago
your headset cap and lower headset doesnt seem right, it should be at least 1 or 2 mm gap
Posted over 12 years ago
You're totally right,below the top there's a spacer over the compression ring. When I had the top over the compression ring the top didn't fit right, cracked and so I put a spacer,works great but if you know of a more elegant solution let me know.
Posted over 12 years ago
that spacer not from vp headset right? because that spacer doesnt match with your headset
Posted over 12 years ago
This bike is awesome dude, I love it so much. Look skinny not bulky like other visp. Anyway, what's size this frame? 54 or 56?
Posted over 12 years ago
Thanks,its a really sweet frame. I don't remember exactly but im pretty sure that its a 56,you should upload your ride!
Posted over 12 years ago
Yeah I will upload my bike asap. My bike is still in progress, I've got a trouble to get a visp frame 56 in here. There's no shop which sell 56 visp frame..
Posted over 12 years ago
Your's got an amazing seatpost! You should make a picture from the drivetrain side - to fully show the beauty!
Posted over 12 years ago
Thank you, it really is my pride and joy and i got lucky on ebay! I'll be sure to although im waiting on new SRAM cranks to snap new pics
Posted over 12 years ago
gibran_ramadhan says:
nice build!
Posted almost 12 years ago
Kevin_R says:
Thanks :D
Posted almost 12 years ago