Selling a MINT condition No.22 Little Wing Fixed Gear. All parts were purchased brand new a few months ago and professionally installed. The bike and parts have less than 100 ridden miles.
The 56cm Little Wing frame is completely titanium with an integrated seatpost. Amazing frameset built with high end parts, see below!
-56cm No.22 Little Wing Frameset w/ 1.5" Carbon Fork
-Chris King Headset
-Chris King Ceramic Bottom Bracket
-SRAM Omnium Cranks 170mm
-Sugino Zen 48T Chain Ring
-D.I.D. Racing NJS Chain
-EAI Gold Medal 17T Cog
-Mavic Ellipse Wheelset
-Continental Super Sport Rear Tire
-Continental GP4000S II Front Tire
-Selle Italia Flite Saddle
-Thomson Stem
-Renthal Fatbar Lite Carbon Risers
Selling the complete bike for reasonable offers. Willing to part out if the frameset sells first.
To get an idea of the price point, please see the retail price for the Little Wing framset.
https://22bicycles.com/collections/litt...
Please email me at eric [at] grandmighty.com or text 4o8-80two-2167 if interested
The 56cm Little Wing frame is completely titanium with an integrated seatpost. Amazing frameset built with high end parts, see below!
-56cm No.22 Little Wing Frameset w/ 1.5" Carbon Fork
-Chris King Headset
-Chris King Ceramic Bottom Bracket
-SRAM Omnium Cranks 170mm
-Sugino Zen 48T Chain Ring
-D.I.D. Racing NJS Chain
-EAI Gold Medal 17T Cog
-Mavic Ellipse Wheelset
-Continental Super Sport Rear Tire
-Continental GP4000S II Front Tire
-Selle Italia Flite Saddle
-Thomson Stem
-Renthal Fatbar Lite Carbon Risers
Selling the complete bike for reasonable offers. Willing to part out if the frameset sells first.
To get an idea of the price point, please see the retail price for the Little Wing framset.
https://22bicycles.com/collections/litt...
Please email me at eric [at] grandmighty.com or text 4o8-80two-2167 if interested
Attached Photos:
Post a price.
Asking $3100 + $80 Shipping for everything complete
More Pictures added
Attached Photos:
Do you have a measurement from the bottom of seat tube to top of seat mast? I want this but the seatmast looks to be cut too much for my height..
I can get this measurement for you but there's still a few inches of adjustment in the seat post. I cut it as little as possible.
How tall are you? I'm 5'11" and the seat can still go up.
How tall are you? I'm 5'11" and the seat can still go up.
How much fro omniums with chris king bb?
A measurement would be great, thanks.
I'm 6'2 1/2 with roughly a 35" inseam.
I'm 6'2 1/2 with roughly a 35" inseam.
Forgot to get a tape measurer yesterday so I'll have to try and get one today.
I did query No. 22 about the seat post and they said for a nominal fee they can easily weld on an extension and then polish it back if the post is cut too short for you. Any bike builder that handles titanium should be able to do this in fact.
I did query No. 22 about the seat post and they said for a nominal fee they can easily weld on an extension and then polish it back if the post is cut too short for you. Any bike builder that handles titanium should be able to do this in fact.
can you measure from the top of the seat to center of the bb? Thanks!
Okay, just measured the seat tube and integrated post.
I first adjusted the seat post all the way up to where it still had enough insertion. So the current max height is:
29" from the center of the BB to the seat rails.
or, 30-3/4" from the center of the BB to the top of the saddle.
Take into consideration the steep seat tube angle and the longer 170MM Ominium cranks, the max seat height is fairly high.
I first adjusted the seat post all the way up to where it still had enough insertion. So the current max height is:
29" from the center of the BB to the seat rails.
or, 30-3/4" from the center of the BB to the top of the saddle.
Take into consideration the steep seat tube angle and the longer 170MM Ominium cranks, the max seat height is fairly high.
Not sure what the crank arm length has to do with the price of eggs but okey.
Bump
Bump, any opinions on the height of the integrated seat post
Would you be willing to sell just the frame/fork/headset?
Bump
Send offers!!
I'm willing to sell it as a frameset but with the Crankset/Chris King Ceramic BB included as the only exception.
I'm willing to sell it as a frameset but with the Crankset/Chris King Ceramic BB included as the only exception.
Bump, anyone want just the frameset + Chris King Ceramic BB?
i can offer $650 shipped for the frameset. if ya wanns throw the BB in for free im okay with that
Dibbs on the wheelset
Oh damn pwebb playing hardball. I'm prepared to do $651 for the frameset.
+1
Selling a virtually brand new $2500 frame set with a $250 bottom bracket for anything under $1000 is not going to happen. This depreciation is worse than a yacht.
I'm willing to give someone a god damn steal if they buy the entire bike complete so I don't have to deal with the hassle of parting it out, and because I know I went over board in building this bike. $2600 Cash + Shipping for EVERYTHING. Bottom line, will not move from this price and don't really care if it goes or not. It's been my living room's statement piece and that's still pretty cool.
If I have to part it out, that kind of a steep discount will not apply.
$1900 + Shipping for the Frameset + BB is the lowest I can do.
Will not part anything else out until someone buys the frameset.
I'm willing to give someone a god damn steal if they buy the entire bike complete so I don't have to deal with the hassle of parting it out, and because I know I went over board in building this bike. $2600 Cash + Shipping for EVERYTHING. Bottom line, will not move from this price and don't really care if it goes or not. It's been my living room's statement piece and that's still pretty cool.
If I have to part it out, that kind of a steep discount will not apply.
$1900 + Shipping for the Frameset + BB is the lowest I can do.
Will not part anything else out until someone buys the frameset.
Well I hope you learned your lesson then, shoulda went with a 2015 Leader 725 ya silly head!!!
Tell me about it!
One more bump
One more bump
Replies aren't allowed because this topic is closed.