Paul's Road Cranks take advantage of the narrower chainstays found on road frames, and the 44mm chainline of High Flange hubs.
These cranks use a specially designed interlocking chain ring/crank interface. Four 7075 Aluminum chain ring bolts with T25 Torx heads bolt through the chain ring and into the reinforced spider on the crank arm.
The crank arms are machined from 2024 aluminum, a very strong and stiff material. They are given a black anodize. The crank arms are 170mm. The chain rings are machined out of 6.3mm thick aluminum plate; very sturdy. Wider teeth designed only to work with 1⁄8” chains which prolongs their life span. 46tooth ring in the Suit of Cards design.
I installed them and rode twice so no visible wear on them. Cost $275 USD Asking $225 USD
These cranks use a specially designed interlocking chain ring/crank interface. Four 7075 Aluminum chain ring bolts with T25 Torx heads bolt through the chain ring and into the reinforced spider on the crank arm.
The crank arms are machined from 2024 aluminum, a very strong and stiff material. They are given a black anodize. The crank arms are 170mm. The chain rings are machined out of 6.3mm thick aluminum plate; very sturdy. Wider teeth designed only to work with 1⁄8” chains which prolongs their life span. 46tooth ring in the Suit of Cards design.
I installed them and rode twice so no visible wear on them. Cost $275 USD Asking $225 USD
Attached Photos:
Replies aren't allowed because this topic is closed.