planned to replace my Sensa, ordered March 2023, inspired by ianiscaratti..
Frame:
Small/52cm Reynolds 725 main triangle, di2 ports, external brake routing, flat mount, BSA threaded bottom bracket
Fork/Headset:
Brother Cycles full carbon, Hope
Crankset/Bottom Bracket:
R8000 170mm, Pioneer R7000 power meter, Wheels MFG BSA abec5 angular contact bearings
Pedals:
M540 SPD
Drivetrain/Cog/Chainring/Chain:
R8000 46/34, R8000 11/32, HG901
Derailleurs/Shifters:
6800 FD, RX800 RD, R7000
Saddle/Seatpost:
PRO Griffon, Deda Zero100 27.2 (stealthed), Thomson 29.8 seatpost clamp
Brakes:
TRP Spyre SLC w/ XT MT800 160/140 rotors
Front Wheel/Hub/Tire:
DT Swiss P1800 Spline 23, Vittoria Corsa Control Graphene 28mm
Rear Wheel/Hub/Tire:
DT Swiss P1800 Spline 23, Vittoria Corsa Control Graphene 28mm
Accessories:
k-edge garmin mount
Bike History
Click a link below to see past stages of this bike.
Added by henry510. Last updated 9 months ago.
As of 9 months ago, henry510 has indicated that they no longer own this bike.
43 Comments
Nice build!
Just wondering how tall you are as I'm planning on getting a Stroma but not sure about a small or medium?
Thanks
Posted 12 months ago
172cm but the small size fits more like normal 54cm so just depends on what fit you are going for.
Posted 12 months ago
That's great, thanks.
I'm 175cm but shortish legs so I reckon the small should be ideal.
Posted 12 months ago
How's riding 1x without the clutch?
Posted about 1 year ago
If you mean running RX800 with the clutch disabled, zero issues even on super bumpy terrain. I find the clutch really only helps against chain slap and not for chain retention specifically.
Posted about 1 year ago
I am using the 105 di2 on a different build and had the R7000 shifters from my old cx bike. Reuse + recycle.
Posted about 1 year ago
dis gon be good
Posted over 1 year ago
I'm pretty stoked. The frame looks good in person. Will report back how the di2 install process goes and post some final build pics.
Posted over 1 year ago
damn you're right! I have some conti terraspeeds in gumwall 35mm but they would be a tight fit.
Posted over 1 year ago
frame is pretty good, geo is slacker than the numbers tell so i pulled the 12sp di2 off in favor of mech disc parts i already had for an ubercommuter style
Posted over 1 year ago
so cool!
Mine is at my ex for some riding but I'll ride it next month. When do you plan to finish the build?
Posted over 1 year ago
Dude yeah, post some photos on the road once you are able to ride your build.
The plan is to finish it by end of June (the frame is currently at my parent's house) I think. I have some 5-6 hour rides planned I think it will exceed on.
Any crazy ideas or parts you think I should try on it?
Posted over 1 year ago
I'll post pictures as soon as I ride it.
Your choice of parts looks good to me.
I personaly will put on a thinner saddleclamp and a darimo alloy stem just for looks but only if I decide to keep the bike.
Darimo IX2AL Stem in raw would look amazing on this build imo
Posted over 1 year ago
I could get the Hope headset in silver for aesthetic purposes, Wolf tooth was sold out for some time!
Posted over 1 year ago
How is your biuld progressing? I'm planing on building mine propper and can't wait to have it done.
Posted over 1 year ago
sorry I accidentaly deleted your comment but be patient and I'll upload pictures as soon as possible
Posted over 1 year ago
just uploaded the rolling stock photo. going to cut fork and run the wires this week. should have it operational by mid month!
Posted over 1 year ago
looks great and the weight is very good. A friends made in italy cinelli nemo with full dura ace is over 10kg. The silver headset doesn't look lost like i imagined. It works well with the silver discs and the complete black rest of the build!
How does it ride?!
Posted over 1 year ago
geo slacker than expected and all my k's are spent on short steep climbs so i really noticed it. so i pulled the 12sp di2 off in favor of mech disc parts i already had for an ubercommuter style. now my collarbone us broken (diff story lol) so i have time to plan.
Posted over 1 year ago
Take a look! new weight is 9.13kg even with heavy dt wheels, lost some grams due to 1x chainring maybe
Posted about 1 year ago
Weight is ok and nice build. mine rides great even on steep hills I don't realy notice it
Posted about 1 year ago
I dropped tire pressure to 4 bar on 31mm gp5000 rides like a dream and even rips gravel.
Posted about 1 year ago
glad that you like it. Mine will retire for the 2024 season becaus I'll get my Aerocross back
Posted 10 months ago
Por que no los dos? But I am excited to see the 2024 version of the Aerocross
Posted 10 months ago
because i have a trackbike, dwoncountry, enduro, commuter, winterbike and a road bike which are more than enough to clean an d maintain. No need to add more more non specific bikes.
Posted 10 months ago
Photos
ianiscaratti says:
did you sell it?
Posted 3 months ago
henry510 says:
Indeed I did, could never quite get the fit right and maybe should have bought the XS size
Posted 3 months ago
ianiscaratti says:
what a pitty! I just finished the dm hanger prototype and will be cnc the first ones soon. follow@nichecycling.ch for more infos
Posted 3 months ago