The amazing Dosnoventa Houston, with all the best parts I could find to do it justice.
Frame:
Dosnoventa Houston N.A.S.A. 58cm
Fork/Headset:
DSNV Full Carbon / Deda integrated
Crankset/Bottom Bracket:
Sugino 75 165mm / SG75 BB
Pedals:
Mavic Sprint / Mavic Avenir shoes
Drivetrain/Cog/Chainring/Chain:
Shimano Dura Ace 16t / Sugino Zen 50t / Izumi V-Chain Supertough
Saddle/Seatpost:
Selle San Marco Zoncolan / Integrated
Brakes:
SRAM Rival
Front Wheel/Hub/Tire:
American Classic 420 Aero / Vittoria Randonneur
Rear Wheel/Hub/Tire:
American Classic 420 Aero / Vittoria Randonneur
More Info:
17.15lbs
Added by jaspertandy. Last updated over 12 years ago.
Latest 21 Comments
First time seeing this frame, so sick!
Posted about 12 years ago
Thanks man, glad you like it. Dosnoventa's whole range is great.
Posted about 12 years ago
Awesome frame and build! BIG must have on these frames.. How long do you have between middle of BB to saddlerails? Dont now if im going for a 56 or 58..
Posted about 12 years ago
Hey, I totally forgot to reply, sorry this is so late. It's 80cm from middle of BB to rails, but I've had roughly one inch cut off that. Thanks for the comment :)
Posted about 12 years ago
the cleanest Dsnv i've seen on pedal room by far. Man I'm just hypnotized by their frames, especially the houston nasa! Did you have to saw down your seat tube to get the right height?
Posted about 12 years ago
Hey, glad you like it. I don't think those guys make a bad frame! Yeah I cut an inch off the seat tube. They supply them over-sized so you can get it just right.
Posted about 12 years ago
amazing bike!! dosnoventa looks amazing! I am wondering which brand is the seatpost clamp? does it came with the purchase of the frame or you had to buy it in another place?
Posted over 12 years ago
Hey, thanks! Yeah, Dosnoventa frames are pretty amazing. Great guys, too. The seat post clamp is made by Selcof and it came with the frame when I bought mine (along with an expanding star nut and headset). You thinking of ordering?
Posted over 12 years ago
thanks for the reply! I'm sure ordering one in the near future, just waiting for some money, or looking if they are going to open a distributor in the US.
Posted over 12 years ago
what a babe! and the bikes not too shabby either ;)
awesome build man... can't wait to see it in real life
Posted over 12 years ago
Photos
HanyTheo says:
hei how did you mount a brake on that fork? you drill them?
Posted over 11 years ago
jaspertandy says:
It comes pre-drilled with a rubber cap painted onto the front hole (covering the hole if you decide to go brakeless). I used a drill to go at the cap from behind to remove it. It's only a few mm thick.
Posted over 11 years ago
HanyTheo says:
so you mean, you can just poke it through? because my dsnv frame just arrived and I wanted to install a front brake[safety first]
Posted over 11 years ago
jaspertandy says:
I'm not sure if the Detroit is exactly the same setup, but I think it is. You should just be able to poke it through, yeah. I didn't want to risk cracking the paint by poking it, though, so I drilled for a cleaner hole. Dosnoventa do say you can just poke it though (I asked them on Facebook when my frame arrived!)
Posted over 11 years ago
HanyTheo says:
mine'll be ready tomorrow! be sure to check em out hehe
Posted over 11 years ago