Custom built titanium road machine
Frame:
Moots Vamoots CR - 62cm
Fork/Headset:
Moots tapered road fork (Produced by Enve)/Chris King InSet 8 (black)
Crankset/Bottom Bracket:
Shimano Dura Ace 9000 (180mm) w/Stages/Chris King Press Fit 30 (black) had to be replaced by Sram to get rid of creaking...
Pedals:
Shimano Ultegra SPD-SL
Drivetrain/Cog/Chainring/Chain:
Shimano Dura Ace 9000 (52-36/11-28)/Shimano Dura Ace HG901
Derailleurs/Shifters:
Shimano Dura Ace 9000 (front/back)
Saddle/Seatpost:
Specialized Romin Pro 155mm/Enve Seatpost (0mm setback)
Brakes:
Shimano Dura Ace 9000 (front/back)
Front Wheel/Hub/Tire:
Enve SES 3.4/Chris King R45/Sapim CX Ray/Vittoria Corsa SC (25mm)
Rear Wheel/Hub/Tire:
Enve SES 3.4/Chris King R45/Sapim CX Ray/Vittoria Corsa SC (25mm)
Accessories:
Jagwire Road Elite Link break and shift kit (black)/Enve computer mount (Garmin)/Garmin 810/2 x King Cage Ti bottle cage/Thomson seat post clamp (34.9mm/black)/Enve Ti skewers (front/back)
Bike History
Click a link below to see past stages of this bike.
Added by Strandolini. Last updated almost 8 years ago.
10 Comments
Whats your reason for changing the seatpost from 25mm setback to no setback?
Posted almost 8 years ago
Long story short, i need a long stem to keep my knees from hitting the bars when out of the saddle (long legs). To keep the same reach when in the saddle I had to reduce the setback similar to increased stem length.
Posted almost 8 years ago
Extremely hard to make a big bike look this good. You've done well here. Good build, too.
Posted over 8 years ago
Thank you jbaillie! Very happy with the result, can´t wait for the Norwegian summer to start:) Love your Firefly as well. Considered less compact frames like yourself, but ended up going Vamoots CR (stock geometry). Cheers!
Posted over 8 years ago
Can't say I haven't done this before; kick back with a beverage (beer for me) and admire a fresh new build. Looks awesome!
Posted over 8 years ago
Thank you m_sobie! It is sure part of the fun to kick back and enjoy the result. Had this picture not been taken before work, I would probably have had a beer myself;) Have a good one!
Posted over 8 years ago
Photos
dt123 says:
Can you provide reference to manufacturer of the fork, is it really Enve?
Posted almost 8 years ago
Strandolini says:
No proof, but the fork came with an Enve top cap
Posted almost 8 years ago